Quick-release and manual release pivot-up davits

Model 6100 & Model 6000 - carry inflatable boats on shallow swim platforms


Pivot-up Davit System (model 6100) with quick release, or the Pivot-up Davit System (model 6000) with manual release, are both designed to carry an inflatable boat or dinghy on the swim platform of boat as shown in the pictures.

This davit is the highest quality, easiest to install, simplest to use davit system on the market.

"A davit with no expensive gluing of parts on your dinghy, no hassles, no worries....just go boating!" 




















  • No gluing of fittings on inflatable.
  • Stainless steel retainers "cradle" inflatables securely in place.
  • Easy installation and use.
  • Easily removed in seconds using the quick release system.
  • Constructed of marine grade stainless steel and electro-polished for extra protection.
  • Stainless steel mounting hardware included.
  • Dinghy may be pulled tightly against transom of larger vessel and lifting lines used to secure dinghy to cleats of vessel.
  • Comes with added backing plates at no extra charge.
  • Recommend "holding lines" to secure boat to larger vessel as shown in drawing.
  • Maximum weight 300 lb.
  • Support pads, 3" wide by 12" long are welded to bottom section of retainers for extra support for inflatable.
  • Retainers will accommodate inflatable tubes up to 17" diameter.
  • Shipping weight 8 lb. 3 oz.
  • Works great with the Pivoting Motor Mount Bracket. See below.
  • Optional davit mount extensions also available. See below.
  • Or consider our Complete Davit System - pivoting davit, pivoting motor mount and stand-off bars.
  • Optional stand-off bars are recommended to keep dinghy in upright position on swim step, in 18", 24", 30", 36" length.

H2O Davit Pictures
Click to view these pictures below.

Ask the Experts

Contact usfor advice on the davit system that is best for your needs

Email: info@allboatproducts.com  Call Toll free: 1-888-309-0990   |   A sister website of www.allboatproducts.com   |   Copyright

Need More Room On Your Swim Platform?
Need extensions to push your Pivoting Davit System farther outboard aft to give you more room on your swim platform?


18" Davit Mount Extensions offer you another 12" of room and are also convenient if you need to install the davit system on a swim platform with obstructions, ladders, hardware and other items that may be in the way of installation and use.


See details and prices on the extensions here.




Want to leave you engine on your dinghy while it is in the davit system?

Model 3000 Adjustable Pivoting Outboard Motor Mount for Dinghies. It is designed for inflatable boats and hard shell dinghies.


For inflatable boats and hard shell dinghies, this "pivoting" bracket allows the boater to leave the outboard motor on the dinghy when raising dinghy to vertical position on swim platform because the bracket pivots to different angles. Eliminates need for storage for motor, no spilling of fuel or oil.


  • 90 degree and 45 degree positions.
  • Max 9.9 HP, max. weight 100lb.
  • This innovative "pivoting" bracket allows the boater to leave the outboard motor on the dinghy when raising dinghy to vertical position on swim platform.
  • Eliminates need for storage for motor, no spilling of fuel or oil.
  • No need in rough seas to take risks to move motor.
  • 6061-T6 aluminum alloy, anodized.
  • All fasteners are stainless steel and included.
  • Polypropylene motor mount.
  • Mounting flange 7" high by 8" wide.
  • Depth: 7" out from mounting flange to end of motor mount board.
  • Shipping weight 8 lb. 4 oz


See details and pricing on the pivoting motor mount here.

Still not sure?
Ask the Experts

Contact usfor advice on the davit system that is best for your needs

pivot-up davit systems

Securely and conveniently store your inflatable boat, hard-shell dinghy, or PWC on your yacht.

Toll free: 1-888-309-0990  Email: info@allboatproducts.com

Inflatable Boat & PWC Davits